Required equipment for water transfer printing

We have Manual and Automatic Water transfer printing tank, automatic spray device, Washing conveyor, Drying oven, Drying water line, Drying chemical line, Activator-spray gun, Spray Booth and other hydrographic device.   

Small tank size advise as below, you can select one of them.

1. Outer size: 1.6m (L)*0.7m (W)*0.8m (H) - Inner size: 1.2m (L)*0.6m (W) * 0.7m (H)                                  

2. Outer size: 1.6m (L)*0.9m (W)*0.8m (H) - Inner size: 1.2m (L)*0.8m (W) * 0.7m (H)                   

3. Outer size: 2m (L)*0.9m (W)*0.8m (H) - Inner size: 1.5m(L)*0.8m(W)*0.7m(H)                       

4. Outer size: 2.5m(L)*1m(W)*0.8m(H) - Inner size: 2.0m(L)*0.9m(W)*0.7m(H)                             

5. Outer size: 2.8m (L) * 1.2m (W) * 0.8m (H) - Inner size: 2.2m (L)*1.05m (W)*0.7m (H) 

Automatic Spray Activator film flowing Dipping Tank

Outer size: 10m (L) * 0.9m (W) * 0.8m (H)

Automatic Washing Machine

Outer size: 10m (L) * 1m (W) * 1.45m (H)

Automatic Drying water line  

Outer size: 12m (L) * 1m (W) * 1.25m (H).    

Automatic Drying chemical line  

Outer size: 10m (L) * 1m (W) * 1.25m (H)

Manual Spray Booth

Outer size: W 128CM * L 180CM * H: 200CM  

Drying Oven 

Outer Size: L156 *W98 * H180cm       

When you do water transfer printing process, you need all components as below.                                      

1. Machine: Water transfer tank, activator-spray device, washing conveyor, drying line, oven, spray booth.

2. Accessories: Spray gun, air compressor, water, drainage system, aerated room, tube, wind tube, fixture to hold the item                           

3. Material: Water transfer film, activator, base paint, clear coat & other chemical agent.

4. Technology: After-sales service, video, picture, training or learn by yourself.           

Before you customize Machine size and order machine, you should offer us the details as below.                    

1. Biggest Printing Product Size (width, Length or diameter/height)                                             

2. Product Material, production output per day, local voltage                                                

3. How big is your production room to place all the machine.