1. The model water sticker should first be cut off from the entire piece of paper and soaked in warm water for about 1 minute.
2. Then quietly try to twist it with your fingers. After acknowledging that the adhesive between the surface layer of the plastic film and the adhesive paper has melted and the plastic film can be separated, remove it from the water.
3. Place it near the position where the picture needs to be posted on the model, and use your fingers to quietly slide the plastic film with the picture onto the surface of the model from the backing paper. The base paper can be discarded.
4. After adjusting the orientation of the picture accurately, use a sanitary swab to absorb the remaining moisture between the sticker and the model, while squeezing out the remaining bubbles. After being placed and dried, plastic water stickers with various logos can be firmly adhered to the surface of the model.
31 Binhe Road, Zhangmutou Town, Dongguan City, Guangdong Province, China.
Water Transfer Printing Film | Activator | Base Primer | Clear Coat | Hydro Dipping Machine | Service | Training | Technology Support

Scan to add WeChat
Contact : Robbie Yuan
13423039354
Service hotline
13423039354
Hotline
86-769-87123588
We are 20-year experience factory on water transfer printing series products. Welcome to inquire us.
Filing number : 粤ICP备19109747号-1 Technical Support: Zhongqi Yitong Disclaimers