PP treatment agent water transfer printing PP material

PP treatment agent

　　PP-01A treatment agent is specifically used for surface treatment of difficult to stick materials such as PP, PE, TPE, TPR, and nylon. After treatment, the surface activity increases, and it can be firmly adhered with instant quick drying adhesive. Widely used in materials such as PP, PE, TPR, TPE, etc., they adhere to each other or adhere to each other, resulting in significant results and greatly improved bonding strength.

　　Physical properties
　　Main component active agent
　　Colorless and transparent liquid in appearance
　　Specific gravity (25 ℃) 0.8g/cm3

　　Usage method
　　1. Clean the surface of the product to be bonded, remove impurities such as oil stains, and dry it.
　　2. Spray the PP treatment agent onto the PP bonding surface and wait for 1-2 minutes (3-5 minutes for sanded material)
　　3. Materials that have been sprayed with treatment agents and primers should be used up within 40 minutes. If left for too long, the effect will be reduced

　 Attention
　　1. Storage should be kept away from sources of ignition, heat, and direct sunlight.
　　2. Unused treatment agents should be immediately sealed and stored in a cool and dry place
　　Packaging and Storage
　　Packaging: 4KG/bottle
　　Storage: Store in a ventilated place away from heat and light below 25 ℃
　　Shelf life: 6 months.